|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Power Metal Film Resistor MF-S Series * Flameproof protection * Small size for power rating * Range of 4 sizes: 0.5 watt to 3 watt at 70C Solder coated copper wire Flameproof protection Legend mark or color code depending on size Electrical Data IRC Type MF1/2S MF1S MF2S MF3S Power Rating @ 70C (watts) 0.5 0.1 - 1M 1.0 350 2.0 0.1 - 470K 3.0 <1: 350 10: 150 700 150 500 1: 5, 10 >1: 1, 2, 5 E24 Preferred 110 -55 to 235 80 60 Resistance Range (ohms) Limiting Element Voltage (volts) TCR (ppm/C) Isolation Voltage (volts) Resistance Tolerance (%) Standard Values Thermal Impedance (C/watt) 140 Operating Temperature Range (C) Environmental Data Characteristic Loaded at Rated Power: 1000 hrs at 70C Shelf Life: 12 months at room temperature Derating from Rated Power at 70C Climatic Climatic Category Temperature Rapid Change Resistance to Solder heat Maximum 5 1 zero at 155C 1 40/125/56 0..5 0.5 General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print. Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com A subsidiary of TT electronics plc MF-S Series Issue October 2008 Sheet 1 of 3 Power Metal Film Resistor Physical Data d D L f Dimensions (Inches and (mm)) & Weight (g) IRC Type MF1/2S MF1S MF2S MF3S L max 0.244 (6.2) 0.354 (9.0) 0.492 (12.5) 0.571 (14.5) D max 0.090 (2.3) 0.134 (3.4) 0.165 (4.2) 0.201 (5.1) f min 0.039 (21.0) 0.772 (19.6) 0.700 (17.8) 0.937 (23.8) d nom 0.024 (0.6) 0.031 (0.8) 0.031 (0.8) 0.031 (0.8) PCB Mounting Centers 0.402 (10.2) 0.500 (12.7) 0.724 (18.4) 0.799 (20.3) Min Bend Radius 0.024 (0.6) 0.047 (1.2) 0.047 (1.2) 0.047 (1.2) Wt. nom 0.3 0.5 0.9 1.1 Construction The resistance element is a precisely controlled thin film of metal alloy on a high purity ceramic core, protected by a cement coating applied so that terminations remain completely clear. This permits a well defined body length, (clean lead to clean lead dimension L). Terminations Material Strength Solderability Solder-coated copper wire. The terminations meet the requirements of IEC 68.2.21 The terminations meet the requirements of IEC 115-1, Clause 4.17.3.2 Marking MF Series resistors are color coded with 4 bands. IEC 62 colors are used. Solvent Resistance The body protection and marking are resistant to all normal industrial cleaning solvents suitable for printed circuits. Flammability The resistors will not burn or emit incandescant particles under any condition of applied temperature or power overload. Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com MF-S Series Issue October 2008 Sheet 2 of 3 Power Metal Film Resistor Application Notes 1. If the resistors are to dissipate full rate power, it is recommended that the terminations should not be soldered closer than 4mm from the body. 2. Due to operating temperature limitations imposed by some pcb materials, derating may be necessary. An estimate of the temperature rise to be expected can be calculated using the thermal impedance figures given under Electrical Data. 3. Lead formed resistors can also be supplied. Standard options of Lancet, Radial, and Goalpost forming are shown in lead Form Information section. Ordering Data Sample Part No. IRC Type Value MF1/2S, MF1S, MF2S, MF3S (Use IEC 62 code) MF2S 6802 J R Tolerance (Use IEC 62 code) J = 5%, K = 10% Packaging Details R = Reel, A = Ammo Type MF1/2S MF1S MF2S Code R A A MF1/2S 5000 5000 2000 MF1S 2500 2500 1000 MF2S 2500 2500 1000 MF3S 1000 N/A N/A Packaging The preferred method of packaging is taped and ammo packed. See figure 1 for critical dimensions. Alternative packaging is available by special request. 6 f1 b 6 f2 c Body location: f1 - f2 1.4mm Type MF1/2S MF1S MF2S MF3S b 52 52 52 67 c 5 5 5 10 Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com MF-S Series Issue October 2008 Sheet 2 of 3 |
Price & Availability of MF3S6802JA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |